Titanium Dioxide
Rutile and anatase grades. The primary white pigment for opacity, brightness and durability in decorative, industrial and powder coatings.
Business division
Paints & Coatings
Raw materials for Bangladesh’s paint, coating, adhesive and construction chemical manufacturers — sourced direct from producers, with stock held on fast-moving items.
1994
Trading since
8
Product lines
17
Global principals
8
Source countries
The division
Consistency is the whole job
A paint factory cannot reformulate every time a filler or a pigment changes. Shade drifts, opacity drops, and the complaint comes back from the dealer three weeks later.
So this division works on one principle — the same producer for the same customer, wherever we can hold it. We source directly, we do not switch origin to save a few cents, and we tell you in advance if a change is coming.
We supply decorative and industrial paint manufacturers, powder coating producers, adhesive and sealant makers, and construction chemical companies across Bangladesh.
Product range
What we supply
Everything from the pigment that carries your shade to the additive that fixes your film defect.
Pigments
Organic and inorganic colour pigments, iron oxides and extenders for shade development across water-based and solvent-based systems.
Fillers
Calcium carbonate, talc, china clay and barytes. Volume, cost control and mechanical properties in the finished film.
Solvents
Aromatic, aliphatic, ketone and alcohol solvents for thinning, viscosity control and flow in solvent-based coating systems.
Resins & Binders
Alkyd, acrylic, epoxy, polyester and emulsion binders — the film former that decides adhesion, hardness and weathering.
Plasticizers
Flexibility and impact resistance in coating and adhesive formulations, including non-phthalate options where the end buyer requires them.
Paint Additives
Dispersants, defoamers, thickeners, driers, biocides and anti-settling agents for stable batches and a clean finish.
Coating Additives
Levelling and wetting agents, matting agents, UV absorbers, adhesion promoters and rheology modifiers for industrial and powder coatings.
Not listed here? Send us the requirement and we will tell you what we can source.
Who we supply
Industries we serve
Decorative Paint
Industrial & Protective Coatings
Powder Coating
Wood Finishes
Adhesives & Sealants
Printing Inks
Construction Chemicals
Marine & Anti-Corrosive Coatings
Automotive Refinish
Masterbatch & Plastic Colouring
Textile Coating
Putty & Wall Care
How it works
Supply, samples and support
Trial before bulk
We supply trial quantities on most items so your lab can run the material through your own formulation before you commit to a container.
Stock on fast-moving items
Titanium dioxide, fillers and regular solvents are held locally, so a production run is not held up waiting for a vessel.
Batch consistency
Same producer, same origin, wherever we can hold it. If a change is unavoidable, you hear it from us before the shipment, not after.
Documents with every consignment
Certificate of Analysis (COA), Material Safety Data Sheet (MSDS) and Certificate of Origin as standard.
Technical backing
Formulation or film defect problem? We bring the producer’s technical team into the conversation with your lab.
Import handled end to end
Indent, PI, LC and UPAS LC, insurance, Chattogram port clearance, and delivery to your factory gate anywhere in Bangladesh.
What our customers rely on
Why Choose Us?
01
Batch-to-batch consistency
The same producer for the same customer, so your shade card stays valid.
02
Direct producer relationships
Appointed agent, not a third-hand supplier. Pricing and problem-solving both improve.
03
Trial quantities
Test it on your own formulation and your own line before committing to bulk.
04
Local stock
Fast-moving materials held in Bangladesh, ready to lift.
05
Technical support
Access to the producer’s technical team when a formulation issue comes up.
06
Thirty years in the trade
Supplying Bangladesh manufacturers since 1994.
Common questions
Paint raw material enquiries
Do you supply rutile and anatase titanium dioxide?
Yes. Rutile is the usual choice for exterior and durable finishes because of its weathering resistance and opacity. Anatase is used where whiteness matters more than durability, typically in interior and some industrial applications. Tell us the system you are formulating and we will recommend the grade.
Can I get a trial quantity before a bulk order?
Yes, on most items. We would rather you prove it on your own line first than have a container of material you cannot use.
Do you hold stock locally?
Yes, on fast-moving items such as titanium dioxide, fillers and regular solvents. Speciality materials are usually imported against confirmed orders.
Will the material be the same every shipment?
We hold the same producer and origin for the same customer wherever we can. If a change becomes unavoidable, we tell you before the shipment so your lab can adjust.
Do you supply non-phthalate plasticizers?
Yes. Where your end buyer or export market requires phthalate-free material, we can source the appropriate alternative.
What documents come with the consignment?
Certificate of Analysis, Material Safety Data Sheet and Certificate of Origin as standard, plus any additional certification your buyer’s compliance team asks for.
Request a quotation
Tell us your material and quantity
Send us the product, grade or specification, quantity and the month you need delivery. We will confirm availability and price, and give you a date we can hold.
Related
Other divisions
Plastics & Polymers
Industrial Chemicals
Textile Chemicals
Agri & Fisheries
Real Estate
PVC resin is handled by our flagship company, Dunhill Corporation Ltd.